The functions of a chainsaw are many but to name a few, the chain wheel is the main unit of the saw. The chain wheel is attached to the main body of the saw and is used to pull the blade through the material, which is then run through the chain and across the blade.
A square tire on the blade is what allows this to happen. Square tires are also what a chainsaw uses to stop the blade from cutting into anything. You can see 60cc chainsaws that are popular among enthusiasts and arborists here.
These are the two main parts, but chainsaws come in many different sizes and models, such as a diamond chainwheel for the top side of chainsaws, and a stubby chain wheel on the bottom that is used for stopping or operating the chainsaw when it’s on the ground.
Other functions of a chainsaw include the cutting of materials and debris off of hardwood, maple, or pine floors, roofs, and walls. Most models will cut all different types of wood, although some will only cut softer woods like limes and pine. However, the diamond-type saw is usually not the best choice for woodworking projects, as it tends to chip pretty easily.
This is often the case with the standard or center-drive model, as the standard model tends to be the most durable and stable. The last major function of a chainsaw is for ripping firewood and is often the fastest type of chainsaw to use.
One major difference between a standard cutoff saw and the chainsaw that we’re talking about is that the standard one has a blade that sticks out at an angle of 45 degrees to the shaft and can be turned sideways by turning the handle, whereas the chainsaw we’re discussing has a blade that sticks out straight at a right angle, and can’t be turned sideways.
The difference in these two makes the chainsaw much better for ripping firewood and other similar projects and is the reason that they’re used most often in backyard woodworking projects. On the other hand, the chain saw is much more suited to ripping concrete and other hard-hitting materials.
If you want to perform both tasks with your chainsaw, you’ll need to choose a saw with a blade and shaft that will fit securely in the middle of your work area and then choose the appropriate offset blade. A center-drive cutthroat saw is probably the most common style of the chainsaw in North America today since it is the cheapest.
The reason for this is that the blades are all lined up along the centerline of the blade, cutting a perfect circle. This cuts wood twice as fast and is much easier to control. Unfortunately, this design also makes the throat of the saw extremely narrow, so ripping logs and small tree limbs is much more difficult.
Because of this, center-drive cutthroat saws must always be left turned slightly toward the user, in order to keep the blade from becoming too narrow. Many center-drive cutters come with separate tables, to keep the user from accidentally turning while using their chainsaw.
Overhead cutters are different than center-drive or right-angle cutters in that they don’t have their blades aligned to the centerline of the saw’s blade or at the very edge of the workpiece. Instead, their blades are off to the right of the miter slot and are much wider than they are tall.
Because they can be positioned anywhere along the length of the blade, Overhead cutters can be positioned closer to the ground than other models, which increases stability. However, this additional height makes it harder to cut certain materials, like softwoods or laminate flooring.
All three types of chainsaws discussed here have different functions and advantages. There are some important differences, however, between the three types of chainsaws. Overall, all chainsaws are easy to use and have many similar functions.
Each type, however, has its own unique benefits and drawbacks, so users should carefully consider which chain saw is best for their particular projects.
